HV-K800 JUUKO SYSTEMS
The HV-K800 is a 4 motion and 1 step for special equipment (pump hydraulic)
- Solid states relays(Mofsets)
- UP o 7.5 A (DC)Rated outputs
- Syncronious input for PLC controls application
- Compact receiving unit
- 12-24 dc operating voltage428
Each systems includes 1 receiver and 1 transmitter includes mounting hardware installation instructions
Previous
Next
| Transmitter(K200-K1200) | |
|---|---|
| Frequency | 433 MHZ OR 902.5 ~ 927.5 MHz |
| Modulation method | 4 FSK(433MHZ) OR 2 GFSK(915 MZ) |
| Typical operating range | 300 ft(100 m) |
| Power suply | 2 x 1.5 V AA Battery |
| Average power consumption | 16ma @ 3VDC |
| Operating Temperature | (- 4°F) (131°F) / (- 40°F) (149°F ) |
| Protection Degree | IP 65 |
| Housing Material | PA6 (30% Glass filled) |
| Overall Dimensions | 188.5× 57.3 × 52.3mm (2-8 buttons) |
| HV-Receiver(K200-K1200) | |
|---|---|
| Frequency | 433 MHZ OR 902.5~927.5 MHZ |
| Control System | PLL |
| Power Supply | 12-24 VDC |
| Operating Temperature | (-20°C)~(+55°C)/(-40°C)~(+65°C) |
| Protection Degree | IP 65 |
| Housing Material | PA6 (30% Glass filled) |
| Overall Dimensions | 142mm x 141mm x 58.5 mm |
| MOFSET Maximum Current | 7.5 Amp (VDC) |